3D bioprinting: from the functional restitution of organs and tissues to the modeling of chronic degenerative diseases
DOI:
https://doi.org/10.53660/883.prw2509Palavras-chave:
Bioprinting, Stem cells, Regenerative Medicine, Organ transplantationResumo
In order to overcome the long wait of patients in queues to receive a donated organ and the advancement of chronic degenerative diseases, regenerative medicine introduced 3D bioprinting. This study aims to expose the possibilities arising from the use of 3D bioprinting in organ transplantation and in the modeling of chronic degenerative diseases. A bibliographic review was carried out using the PubMed and SciELO databases, published between 1993 (due to its relevance) and 2023, no language restriction. By exploring the techniques, it was observed that biomodels created in vivo and in vitro, especially from induced pluripotent stem cells (iPSCs), the main target of this study, mimicked the architecture and physiology of bone, liver, heart tissue and even neural progenitor cells, which impact on the modeling of Parkinson's and Alzheimer's diseases. Despite the existing challenges to reproducing functional organs on a clinical scale, 3D bioprinting is a promising technology that promises to revolutionize the field of regenerative medicine and resolve, in a few years, these obstacles that cause high morbidity and mortality.
Downloads
Referências
ABDOLLAHIYAN, P. et al. Hydrogel‐Based 3D Bioprinting for Bone and Cartilage Tissue Engineering. Biotechnology Journal, p. 2000095, 25 set. 2020.
ABOUL-SOUD, M. A. M.; ALZAHRANI, A. J.; MAHMOUD, A. Induced Pluripotent Stem Cells (iPSCs)—Roles in Regenerative Therapies, Disease Modelling and Drug Screening. Cells, v. 10, n. 9, p. 2319, 5 set. 2021.
AIDA, L. Alexis Carrel (1873–1944): Visionary vascular surgeon and pioneer in organ transplantation. Journal of Medical Biography, v. 22, n. 3, p. 172–175, 15 abr. 2014.
ANTICH, C. et al. Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs. Acta Biomaterialia, v. 106, p. 114–123, abr. 2020.
ARAÚJO, D. S. et al. Exossomos: Estruturas Promissoras Para O Diagnóstico E Tratamento De Doenças E Regulação Dos Processos De Interação Parasito-Hospedeiro. Revista Eletrônica da Faculdade de Ceres, v. 5, n. 1, 10 maio 2016.
BAENA, J. et al. Volume-by-volume bioprinting of chondrocytes-alginate bioinks in high temperature thermoplastic scaffolds for cartilage regeneration. Experimental Biology and Medicine, v. 244, n. 1, p. 13–21, jan. 2019.
BANCROFT, G. N.; SIKAVITSAS, V. I.; MIKOS, A. G. Technical Note: Design of a Flow Perfusion Bioreactor System for Bone Tissue-Engineering Applications. Tissue Engineering, v. 9, n. 3, p. 549–554, jun. 2003.
BETZ, J. F.; HO, V. B.; GASTON, J. D. 3D Bioprinting and Its Application to Military Medicine. Military Medicine, v. 185, n. 9-10, p. e1510–e1519, 9 jun. 2020.
BHISE, N. S. et al. A liver-on-a-chip platform with bioprinted hepatic spheroids. Biofabrication, v. 8, n. 1, p. 014101, 12 jan. 2016.
BUENO, E. M. et al. Increased rate of chondrocyte aggregation in a wavy-walled bioreactor. Biotechnology and Bioengeneering, v. 88, n. 6, p. 767–777, 20 dez. 2004.
CHEN, E. P. et al. 3D Bioprinting of Vascularized Tissues for in vitro and in vivo Applications. Frontiers in Bioengineering and Biotechnology, v. 9, 13 maio 2021.
CHIMBO, K. M. O. et al. Los Beneficios De Las Impresoras 3d Como Herramienta De Innovaciã En La Medicina. Revista Caribeña de Ciencias Sociales, junho 2016.
CHLIARA, M. A.; ELEZOGLOU, S.; ZERGIOTI, I. Bioprinting on Organ-on-Chip: Development and Applications. Biosensors, v. 12, n. 12, p. 1135, 6 dez. 2022.
CHO, H.-J. et al. Induction of pluripotent stem cells from adult somatic cells by protein-based reprogramming without genetic manipulation. Blood, v. 116, n. 3, p. 386–395, 22 jul. 2010.
CHO, S. et al. Reconstructing the heart using iPSCs: Engineering strategies and applications. Journal of Molecular and Cellular Cardiology, v. 157, p. 56–65, 1 ago. 2021.
CHOI, K. et al. The Effect of the Mechanical Properties of the 3D Printed Gelatin/Hyaluronic Acid Scaffolds on hMSCs Differentiation Towards Chondrogenesis. Tissue Eng Regen Med,17 maio 2023.
CROOK, J. M.; TOMASKOVIC-CROOK, E. Bioprinting 3D Human Induced Pluripotent Stem Cell Constructs for Multilineage Tissue Engineering and Modeling. Methods in molecular biology, p. 251–258, 1 jan. 2020.
CUI, X. et al. Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks. Advanced Healthcare Materials, v. 9, n. 15, p. 1901648, 30 abr. 2020.
CUI, Y. et al. Crystallization enhanced thermal-sensitive hydrogels of PCL-PEG-PCL triblock copolymer for 3D printing. Biomedical Materials, v. 16, n. 3, p. 035006, 26 fev. 2021.
DAVOODI, E. et al. Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs. Advanced Materials Technologies, v. 5, n. 8, p. 1901044, 26 maio 2020.
DOSS, M. X.; SACHINIDIS, A. Current Challenges of iPSC-Based Disease Modeling and Therapeutic Implications. Cells, v. 8, n. 5, 30 abr. 2019.
EDGAR, L. et al. Regenerative medicine, organ bioengineering and transplantation. The British Journal of Surgery, v. 107, n. 7, p. 793–800, 1 jun. 2020.
ESWARAMOORTHY, S. D.; RAMAKRISHNA, S.; RATH, S. N. Recent advances in three‐dimensional bioprinting of stem cells. Journal of Tissue Engineering and Regenerative Medicine, 14 maio 2019.
FAN, D. et al. 3D printing of bone and cartilage with polymer materials. Frontiers in Pharmacology, v. 13, 6 dez. 2022.
FARIÑA-PÉREZ, L. A. Jaques-Louis Reverdin (1842-1929): the surgeon and the needle. Archivos Espanoles De Urologia, v. 63, n. 4, p. 269–274, 1 maio 2010.
FORNETTI, E. et al. A novel extrusion-based 3D bioprinting system for skeletal muscle tissue engineering. Biofabrication, v. 15, n. 2, p. 025009, 3 fev. 2023.
FREEMAN, F. E. et al. 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration. Science Advances, v. 6, n. 33, 14 ago. 2020.
FREEMAN, F. et al. Development of a 3D Bioprinted Scaffold with Spatio-temporally Defined Patterns of BMP-2 and VEGF for the Regeneration of Large Bone Defects. BIO-PROTOCOL, v. 11, n. 21, 2021.
FREEMAN, S. et al. Bioink Formulation and Machine Learning-Empowered Bioprinting Optimization. Frontiers in Bioengineering and Biotechnology, v. 10, 13 jun. 2022.
FU, Z. et al. Printability in extrusion bioprinting. Biofabrication, v. 13, n. 3, p. 033001, 8 abr. 2021.
GARCIA, T. R. et al. Impressão 3D de peças anatômicas como ferramentas de educação e auxílio na prática clínica. Research, Society and Development, v. 11, n. 13, p. e248111335234, 6 out. 2022.
GOMES, M. E. et al. Effect of flow perfusion on the osteogenic differentiation of bone marrow stromal cells cultured on starch-based three-dimensional scaffolds. Journal of Biomedical Materials Research, v. 67A, n. 1, p. 87–95, 24 set. 2003.
GOOCH, K. J. et al. Effects of mixing intensity on tissue-engineered cartilage. Biotechnology and Bioengineering, v. 72, n. 4, p. 402–407, 2001.
GOODWIN, T. E. et al. Rotating-Wall Vessel Coculture of Small Intestine as a Prelude to Tissue Modeling: Aspects of Simulated Microgravity. Proc Soc Exp Biol Med. v. 202, n. 2, p. 181–192, 1 fev. 1993.
GOODWIN, T. J. et al. 3D tissue-like assemblies: A novel approach to investigate virus–cell interactions. Methods, v. 90, p. 76–84, nov. 2015.
GRAYSON, W. L. et al. Engineering anatomically shaped human bone grafts. Proceedings of the National Academy of Sciences, v. 107, n. 8, p. 3299–3304, 9 out. 2009.
GRINYO, J. M. Why Is Organ Transplantation Clinically Important? Cold Spring Harbor Perspectives in Medicine, v. 3, n. 6, p. a014985–a014985, 1 jun. 2013.
HAKOBYAN, D. et al. Laser-Assisted Bioprinting for Bone Repair. Methods in Molecular Biology, p. 135–144, 2020.
HEID, S.; BOCCACCINI, A. R. Advancing bioinks for 3D bioprinting using reactive fillers: A review. Acta Biomaterialia, jul. 2020.
HOLTORF, H. L. et al. Scaffold mesh size affects the osteoblastic differentiation of seeded marrow stromal cells cultured in a flow perfusion bioreactor. J Biomed Mater Res A., v. 74A, n. 2, p. 171–180, 1 ago. 2005.
HONG, N. et al. 3D bioprinting and its in vivo applications. Journal of Biomedical Materials Research Part B: Applied Biomaterials, v. 106, n. 1, p. 444–459, 20 jan. 2017.
KAI CHUA, C. Review of Bioprinting in Space and International Journal of Bioprinting Stays ahead of the Game. International Journal of Bioprinting, v. 5, n. 1, 14 jan. 2019.
KAZIMIERCZAK, P.; PRZEKORA, A. Bioengineered Living Bone Grafts—A Concise Review on Bioreactors and Production Techniques In Vitro. International Journal of Molecular Sciences, v. 23, n. 3, p. 1765, 3 fev. 2022.
KHATI, V. et al. 3D Bioprinting of Multi-Material Decellularized Liver Matrix Hydrogel at Physiological Temperatures. Biosensors, v. 12, n. 7, p. 521, 13 jul. 2022.
LARISSA BUENO TOFANI. Estabelecimento de sistemas de cultivo tridimensionais (3D) utilizando células de câncer de ovário como plataforma para ensaios de toxicidade. Theses and Dissertations,10 jan. 2020.
LEBERFINGER, A. N. et al. Bioprinting functional tissues. Acta Biomaterialia, v. 95, p. 32–49, set. 2019.
LEE, A. et al. 3D bioprinting of collagen to rebuild components of the human heart. Science (New York, N.Y.), v. 365, n. 6452, p. 482–487, 2019.
LEE, J.; WAI YEE YEONG. Data processing for multi-material 3D bioprinting. Proc. Of the 3rd Intl. Conf. on Progress in Additive Manufacturing, 1 jan. 2018.
LEI, Y.; WILLERTH, S. M.; FERNANDES, T. G. Editorial: Stem Cell Systems Bioengineering. Frontiers in Bioengineering and Biotechnology, v. 9, 7 maio 2021.
LIU, G. et al. Advances in Pluripotent Stem Cells: History, Mechanisms, Technologies, and Applications. Stem Cell Reviews and Reports, v. 16, n. 1, p. 3–32, 1 fev. 2020.
LU, T.-Y. et al. 3D Printing Approaches to Engineer Cardiac Tissue. EPub, 2 maio 2023.
MANDENIUS, C.-F. Bioreactors: Design, Operation and Novel Applications. [s.l.] John Wiley & Sons, 2016.
MANDRYCKY, C. et al. 3D bioprinting for engineering complex tissues. Biotechnology advances, v. 34, n. 4, p. 422–434, 2016.
MARTIN, I.; WENDT, D.; HEBERER, M. The role of bioreactors in tissue engineering. Trends in Biotechnology, v. 22, n. 2, p. 80–86, fev. 2004.
MATZIOLIS, D. Osteogenic Predifferentiation of Human Bone Marrow-Derived Stem Cells by Short-Term Mechanical Stimulation. The Open Orthopaedics Journal, v. 5, n. 1, p. 01–06, 7 jan. 2011.
MAZZIERO, V. T. Modificações estruturais e operacionais de biorreatores utilizando impressão 3D: caracterização hidrodinâmica e automatização da coleta e tratamento de dados. repositorio.unesp.br, 16 dez. 2021.
MEMIC, A. et al. Bioprinting technologies for disease modeling. Biotechnology Letters, v. 39, n. 9, p. 1279–1290, 26 maio 2017.
MERVE KUZUCU et al. Extrusion-Based 3D Bioprinting of Gradients of Stiffness, Cell Density, and Immobilized Peptide Using Thermogelling Hydrogels. ACS Biomater Sci Eng, v. 7, n. 6, p. 2192–2197, 10 maio 2021.
MING, Z. et al. Advancements in Research on Constructing Physiological and Pathological Liver Models and Their Applications Utilizing Bioprinting Technology. Molecules, v. 28, n. 9, p. 3683–3683, 24 abr. 2023.
MOGHADDAM, A. S. et al. Review of Bioprinting in Regenerative Medicine: Naturally Derived Bioinks and Stem Cells. ACS Applied Bio Materials, v. 4, n. 5, p. 4049–4070, 26 abr. 2021.
MOUTHUY, P.-A. et al. Humanoid robots to mechanically stress human cells grown in soft bioreactors. Communications Engineering, v. 1, n. 1, p. 1–11, 26 maio 2022.
MUTHU PARKKAVI SEKAR et al. Hyaluronic Acid as Bioink and Hydrogel Scaffolds for Tissue Engineering Applications. ACS Biomater Sci Eng, 28 abr. 2023.
NAGHIEH, S.; CHEN, D. Printability – a Key Issue in Extrusion-based Bioprinting. Journal of Pharmaceutical Analysis, fev. 2021.
NEIMAN, V. J. Oscillating hydrogel based bioreactors for chondrogenic differentiation of mesenchymal stem cells. Available in: <https://escholarship.org/uc/item/5vr0q4m2>.
OLGASI, C.; CUCCI, A.; FOLLENZI, A. iPSC-Derived Liver Organoids: A Journey from Drug Screening, to Disease Modeling, Arriving to Regenerative Medicine. International Journal of Molecular Sciences, v. 21, n. 17, p. 6215, 27 ago. 2020.
OLIVEIRA, N. A. et al. Bioimpressão e produção de mini-órgãos com células tronco. Pesquisa Veterinária Brasileira, v. 37, n. 9, p. 1032–1039, set. 2017.
O’NEILL, P. 3D Bioprinter to Print Human Meniscus on the ISS. Available in: <https://www.issnationallab.org/spxcrs27-redwire-bff-meniscus/>.
PAN, T.; WANG, W. From Cleanroom to Desktop: Emerging Micro-Nanofabrication Technology for Biomedical Applications. Annals of Biomedical Engineering, v. 39, n. 2, p. 600–620, 14 dez. 2010.
PETTA, D. et al. Hyaluronic acid as a bioink for extrusion-based 3D printing. Biofabrication, v. 12, n. 3, p. 032001, 28 maio 2020.
PLUNKETT, N.; O’BRIEN, F. J. Bioreactors in tissue engineering. Technology and health care : official journal of the European Society for Engineering and Medicine, v. 19, n. 1, p. 55–69, 2011.
POONGODI, R. et al. Bio-Scaffolds as Cell or Exosome Carriers for Nerve Injury Repair. International Journal of Molecular Sciences, v. 22, n. 24, p. 13347, 12 dez. 2021.
RESTAN PEREZ, M. et al. 3D Bioprinting Mesenchymal Stem Cell-Derived Neural Tissues Using a Fibrin-Based Bioink. Biomolecules, v. 11, n. 8, p. 1250, 21 ago. 2021.
SCAGLIONE, S. et al. A Three-Dimensional Traction/Torsion Bioreactor System for Tissue Engineering. Int J Artif Organs, 28 jul. 2010.
SCHLICH, T. The origins of organ transplantation. The Lancet, v. 378, n. 9800, p. 1372–1373, out. 2011.
SCHULZ, R. M.; BADER, A. Cartilage tissue engineering and bioreactor systems for the cultivation and stimulation of chondrocytes. European Biophysics Journal, v. 36, n. 4-5, p. 539–568, 23 fev. 2007.
SHUKLA, A. K.; GAO, G.; KIM, B. S. Applications of 3D Bioprinting Technology in Induced Pluripotent Stem Cells-Based Tissue Engineering. Micromachines, v. 13, n. 2, p. 155, 20 jan. 2022.
SIKAVITSAS, V. I.; BANCROFT, G. N.; MIKOS, A. G. Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor. Journal of Biomedical Materials Research, v. 62, n. 1, p. 136–148, 12 jul. 2002.
SKARDAL, A. et al. Dynamically Crosslinked Gold Nanoparticle - Hyaluronan Hydrogels. Advanced Materials, v. 22, n. 42, p. 4736–4740, 20 ago. 2010.
SKELDON, G.; LUCENDO-VILLARIN, B.; SHU, W. Three-dimensional bioprinting of stem-cell derived tissues for human regenerative medicine. Philosophical Transactions of the Royal Society B: Biological Sciences, v. 373, n. 1750, p. 20170224, 21 maio 2018.
SLADKOVA, M.; DE PEPPO, G. Bioreactor Systems for Human Bone Tissue Engineering. Processes, v. 2, n. 2, p. 494–525, 11 jun. 2014.
SNYDER, J. et al. Mesenchymal stem cell printing and process regulated cell properties. Biofabrication, v. 7, n. 4, p. 044106, 22 dez. 2015.
SOMAN, S.; VIJAYAVENKATARAMAN, S. Perspectives on 3D Bioprinting of Peripheral Nerve Conduits. International Journal of Molecular Sciences, v. 21, n. 16, p. 5792, 12 ago. 2020.
SPANGENBERG, J. et al. Bioprinting of Magnetically Deformable Scaffolds. ACS Biomaterials Science & Engineering, v. 7, n. 2, p. 648–662, 28 jan. 2021.
SUN, B. et al. A 3D-Bioprinted dual growth factor-releasing intervertebral disc scaffold induces nucleus pulposus and annulus fibrosus reconstruction. Bioactive Materials, v. 6, n. 1, p. 179–190, jan. 2021.
SUN, D. et al. Why 90% of clinical drug development fails and how to improve it? Acta Pharmaceutica Sinica B, v. 12, n. 7, fev. 2022.
SUN, Z.; WEE, C. 3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine. Micromachines, v. 13, n. 10, p. 1575, 22 set. 2022.
SUNG, J. H. et al. Recent Advances in Body-on-a-Chip Systems. Analytical Chemistry, v. 91, n. 1, p. 330–351, 26 nov. 2018.
TAMAY, D. G.; HASIRCI, N. Bioinks—materials used in printing cells in designed 3D forms. Journal of Biomaterials Science, Polymer Edition, v. 32, n. 8, p. 1072–1106, 15 mar. 2021.
TANG, M.; RICH, J. N.; CHEN, S. Biomaterials and 3D Bioprinting Strategies to Model Glioblastoma and the Blood–Brain Barrier. Advanced Materials, v. 33, n. 5, p. 2004776, 16 dez. 2020.
TARASSOLI, S. P. et al. Skin tissue engineering using 3D bioprinting: An evolving research field. Journal of Plastic, Reconstructive & Aesthetic Surgery, v. 71, n. 5, p. 615–623, maio 2018.
TASHMAN, J. W.; SHIWARSKI, D. J.; FEINBERG, A. W. Development of a high-performance open-source 3D bioprinter. Scientific Reports, v. 12, n. 1, 31 dez. 2022.
THARAKAN, S.; KHONDKAR, S.; ILYAS, A. Bioprinting of Stem Cells in Multimaterial Scaffolds and Their Applications in Bone Tissue Engineering. Sensors, v. 21, n. 22, p. 7477, 10 nov. 2021.
TIAN, S. et al. Machine Assisted Experimentation of Extrusion-Based Bioprinting Systems. Micromachines, v. 12, n. 7, p. 780–780, 30 jun. 2021.
TRIPATHI, S. et al. 3D bioprinting and its innovative approach for biomedical applications. MedComm, v. 4, n. 1, 24 dez. 2022.
VAN DEN BERG, A. et al. Personalised organs-on-chips: functional testing for precision medicine. Lab on a Chip, v. 19, n. 2, p. 198–205, 2019.
VERNENGO, A. J. et al. Bioprinting Tissue Analogues with Decellularized Extracellular Matrix Bioink for Regeneration and Tissue Models of Cartilage and Intervertebral Discs. Advanced Functional Materials, v. 30, n. 44, p. 1909044, 11 jun. 2020.
WANG, N. et al. Particulate cartilage under bioreactor-induced compression and shear. Int Orthop, v. 38, n. 5, p. 1105–1111, 1 maio 2014.
WANG, X. et al. 3D bioprinted glioma microenvironment for glioma vascularization. Journal of Biomedical Materials Research Part A, v. 109, n. 6, p. 915–925, 25 ago. 2020.
WANG, X.; WANG, Q.; XU, C. Nanocellulose-Based Inks for 3D Bioprinting: Key Aspects in Research Development and Challenging Perspectives in Applications—A Mini Review. Bioengineering, v. 7, n. 2, p. 40, 29 abr. 2020.
WANG, Z. et al. Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration. Advanced Drug Delivery Reviews, v. 174, p. 504–534, jul. 2021.
WATSON, C. J. E.; DARK, J. H. Organ transplantation: historical perspective and current practice. British Journal of Anaesthesia, v. 108, n. 1, p. i29–i42, jan. 2012.
WATTS, G. Joseph Murray: innovative surgeon and pioneer of transplantation. The Lancet, v. 377, n. 9770, p. 987, mar. 2011.
WILLIAMS, K. A.; SAINI, S.; WICK, T. M. Computational Fluid Dynamics Modeling of Steady-State Momentum and Mass Transport in a Bioreactor for Cartilage Tissue Engineering. Biotechnology Progress, v. 18, n. 5, p. 951–963, 4 out. 2002.
WOON, C. Y. L. et al. Three-Dimensional-Construct Bioreactor Conditioning in Human Tendon Tissue Engineering. Tissue Engineering Part A, v. 17, n. 19-20, p. 2561–2572, out. 2011.
YAMANAKA, S. Pluripotent Stem Cell-Based Cell Therapy—Promise and Challenges. Cell Stem Cell, v. 27, n. 4, p. 523–531, out. 2020.
YANG, Z. et al. 3D-Bioprinted Difunctional Scaffold for In Situ Cartilage Regeneration Based on Aptamer-Directed Cell Recruitment and Growth Factor-Enhanced Cell Chondrogenesis. ACS Applied Materials & Interfaces, v. 13, n. 20, p. 23369–23383, 12 maio 2021.
YEFROYEV, D. A.; JIN, S. Induced Pluripotent Stem Cells for Treatment of Alzheimer’s and Parkinson’s Diseases. Biomedicines, v. 10, n. 2, p. 208, 19 jan. 2022.
YILMAZ, B.; TAHMASEBIFAR, A.; BARAN, E. T. Bioprinting Technologies in Tissue Engineering. Advances in Biochemical Engineering/Biotechnology, v. 171, p. 279–319, 2020.
ZHANG, J. et al. 3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors. International Journal of Molecular Sciences, v. 22, n. 8, p. 3971, 12 abr. 2021.
ZHANG, S. et al. Convergence of 3D Bioprinting and Nanotechnology in Tissue Engineering Scaffolds. Biomimetics, v. 8, n. 1, p. 94–94, 26 fev. 2023.
ZHANG, Y. S. et al. Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. Biomaterials, v. 110, p. 45–59, dez. 2016.
ZHOU, G. et al. In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction. EBioMedicine, v. 28, p. 287–302, fev. 2018.
